Product information

Gigabyte GA-Z270P-D3:  mainboard | ATX | Socket 1151 | 6th and 7th Gen CPU Support | Intel Z270| 4x DDR4 | PCIe 3.0 x16 | PCIe 3.0 x1 | M.2 Socket (Key E) | SATA 600 | Ultra M.2 | USB 3.1 Gen1  | DVI-D | D Sub | HDMI

Product: Gigabyte GA-Z270P-D3
Socket: Socket 1151
Suitable for: 6th and 7th generation processors
Category: Motherboards
Brand: Gigabyte
Condition: Refurbished – with the latest available bios version
EAN: 0889523008430, 4719331847296
SKU: GA-Z270P-D3
Warranty: 6 months
Note: This only contains the motherboard, no I/O shield/ Backplate / Blende

package content:
– Motherboard (GA-Z270P-D3)
– None IO-Shield (tin back plate)
– No manual
– No driver CD
– No cables

CPU
– Supports 7th and 6th Generation Intel® Core™ i7 / i5 / i3 / Pentium® / Celeron® Processors (Socket 1151)
– L3 cache varies with CPU

Chip set
-Intel® Z270

Memory
– 4 x DDR4 DIMM sockets supporting up to 64 GB of system memory
* Due to a limitation of the Windows 32-bit operating system, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than the size of the physical memory installed.
– Dual channel memory architecture
– Support for DDR4 3866(OC) / 3800(OC) / 3733(OC) / 3666(OC) / 3600(OC) / 3466(OC) / 3400(OC) / 3333(OC) / 3300(OC) / 3200 ( OC) / 3000(OC) / 2800(OC) / 2666(OC) / 2400 / 2133 MHz memory modules
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
– Support for non-ECC unbuffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
– Support for Extreme Memory Profile (XMP) memory modules

BIOS
– 2 x 64 Mbit flash
– Use of licensed AMI UEFI BIOS
– Support for DualBIOS™
– PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

Graphics
– 1 x HDMI port, supports a maximum resolution of 4096×2160@24 Hz
* Support HDMI 1.4 version.
– Maximum shared memory of 1 GB
– Support for AMD Quad-GPU CrossFireX™ ​​and 2-Way AMD CrossFire™ technologies (PCIEX16 and PCIEX4)

Audio
– Realtek® ALC887 codec
– High Definition audio
– 2/4/5.1/7.1 channel
– Support for S/PDIF Out

LAN
– Realtek® ^GbE LAN chip (10/100/1000 Mbit)

Slots
– 1 x PCI Express x16 slot, running at x16 (PCIEX16)
* For optimal performance, if only one PCI Express graphics card is to be installed, install it in the PCIEX16 slot.
– 2 x PCI Express x16 slots, operating at x4 (PCIEX4_1/PCIEX4_2)
– 3 x PCI Express x1 slots
(All PCI Express slots conform to the PCI Express 3.0 standard.)

Storage interfaces
– 1 x M.2 connector (Socket 3, M key, type 2242/2260/2280 SATA and PCIe x4/x2 SSD support)
– 6 x SATA 6Gb/s connectors
– Support for RAID 0, RAID 1, RAID 5 and RAID 10

* Refer to “1-7 Internal Connectors” for the installation notices for the M.2 and SATA connectors

Internal I/O Connectors
1 x 24-pin ATX main power connector
1 x 8-pin ATX 12V power connector
1 x CPU Fan Head
2 x System Fan Headers
1 x System Fan/Water Cooling Pump Head
6 x SATA 6Gb/s connectors
1 x M.2 Jack 3 Connector
1 x Front Panel Headpiece
1 x front panel audio header
1 x S/PDIF Out Header
1 x USB 3.1 Gen 1 Header
2 x USB 2.0/1.1 headers
1 x Trusted Platform Module (TPM) header
1 x Serial Port Header
1 x Clear CMOS Jumper

Rear panel connectors
1 x PS/2 mouse port
1 x PS/2 Keyboard Port
1 x HDMI port
4 x USB 3.1 Gen 1 ports
2 x USB 2.0/1.1 ports
1 x RJ-45 port
3 x audio jacks (line in, line out, microphone in)

Accessories
– No

Form Factor
– ATX Form Factor: 30.5cm x 19.9cm
– Solid Capacitor design

OS
– Microsoft® Windows® 10 64-bit (For 7th Gen Intel® CPU)
– Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-bit (For 6th Gen Intel® CPU)*

*To install Windows® 7 OS, a modified installation disk with xHCI drivers packed into the ISO file is required. Please check our User Manual for more detailed instructions.
For the updated Windows® 10 driver, please visit ASRock’s website for details.

Certifications
– FCC, CE
– ErP/EuP ready (ErP/EuP ready power supply is required)